GODIAG GT114 Audi K-Line IMMO Cable, Audi A4/A6 C5 2nd and 3rd Generation Instrument Panel IMMO Key Matching Test Platform
Product Introduction:
The GODIAG GT114 Audi K-Line IMMO cable provides offline key and IMMO display synchronization testing, emergency start-up area detection for intelligent IMMO systems, offline instrument panel diagnostics, IMMO data reading and writing, display mileage correction, and key matching features. It supports Audi A6 and C5 models from 2000-2006.
The GT114 cable is compatible with HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, OBDSTAR, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, AUTEL and other similar diagnostic and programming devices.
Product Specifications:
- Offline connection to the dashboard to convert signals to standard OBD2.
- It supports main chip and device synchronization testing.
- Independent power switch for safe operation.
- Independent ignition switch
- Indicator light switch induction adapter for accurate detection.
Tips for Audi A6 C5 Key Matching Process
1. For key matching, the Megamos ID 48 key is required [Xhorse super chip cannot be successfully matched], and writing back the generated IMMO device data and learning the matching process is necessary.
2. After reading the data, remember the PIN code, as it will be required for the next pairing process. The learning process requires a clear contact signal, and pairing will fail if performed incorrectly. The pairing process must be carried out according to the instructions, such as waiting 5 seconds and then waiting 2 seconds.
Intelligent IMMO System Emergency Launch Area Detection
Press the vehicle’s start button and bring the device’s key identifier close to a designated area. If the key identifier light flashes or stays on, it means that area is the vehicle’s emergency start detection zone. If the customer’s smart key is depleted, simply place the depleted smart key in the emergency start detection zone to start the vehicle.
Vehicle IMMO Initialization and Starter Key Chip Detection
Analysis of Test Results:
1. The key identifier light will blink and then turn off; this indicates that the IMMO chip and chip switch are functioning correctly.
2. If the key identifier light flashes for a long time, this indicates that the chip key and the vehicle’s IMMO system do not match and the chip key needs to be re-paired.
3. If the key identifier light is not flashing, this means the vehicle’s IMMO system is faulty. Please check the vehicle’s IMMO system.
Package Included:
1 x GODIAG GT114 Audi K-Lline IMMO, Instrument Panel IMMO Key Matching Test Platform Cable for Audi A4 A6 C5 2nd and 3rd Generation
