Number of Buttons: 4

Copying Type : Face to Face

Akıllı kumandalar, garaj, kepenk, bariyer kumandaları ve araçlara sonradan takılmış merkezi kilit ( açma kapama) modülünü kumandalarını çoğaltmak, kumanda görünümünü değiştirmek ya da sustalı kumandaya çevirmek için kullanılır. Kullanımı gayet basit ve pratiktir.

It is used to duplicate the controls of the smart controls, garage, shutter, barrier controls and the central locking (on-off) module installed on the vehicles, to change the appearance of the remote or to turn it into a switch control. It is very simple and practical to use.

COPYING PROCEDURE

1.Deletion Process

Press the lock and unlock buttons at the same time. After 2 seconds, the light will flash.After the light turns off, let go of one of the keys and press and release the key you released 3 times with 1 second intervals. (the other key will not be released until the process is finished)If the operation was successful, the light will flash continuously. So you can release the other key as well.

2. Coding ProcessHold our remote that we deleted with the customer remote, back to back.Press the key we want to code on our remote and do not release it.Then press which key we want to code on the customer’s remote in the same way and do not release it.If the coding process is successful, the light of our remote will first flash and then start to light continuously. In this way, you will have done the coding process.

• NOT: 240-320 MHZ SUPPORTED!