The GODIAG GT107+ DSG transmission data adapter is a DSG transmission connection adapter. DSG transmission maintenance engineers can clone, diagnose, and repair the DSG transmission ECU; they can also read, write, and adjust data belonging to the DSG transmission ECU via software such as PCMFlash, PCMTuner, and Kessv2.
This adapter offers automatic and manual selection options for PCMFlash software. You can choose “Automatic” for data reading and writing, and “Manual” for diagnostics. The “Manual” option is also available for other software such as Kessv2, DQ200, DQ250, and DQ500.
Furthermore, by drawing power from the vehicle battery, the adapter can directly read and write DSG transmission data; you can clearly monitor the communication status during the data reading and writing process.
Product Specifications:
1. This adapter is suitable for connecting VAG series transmission ECUs and supports DQ250, DQ200, VL381, VL300, DQ500, DL501 transmission ECUs in vehicles of brands such as Benz, BMW, etc.
2. Voltage indicator: The user can learn the current operating voltage of the transmission ECU. In case of a short circuit or incorrect wiring, the voltage will drop significantly; this can be used to diagnose the problem.
3. The current indicator can display the current operating current of the transmission ECU, and this information is used to assess the operating status of the transmission ECU.
4. The communication indicator can display the current CANbus K-Line communication status.
5. Manual and automatic power switch, 120 ohm switch. Start mode cable (DB9 DSG transmission universal conversion jumper) and a probe are included.
6. Thanks to the detachable gold-plated DB9 connector interface, users can create professional connectors on their own and carry out DIY developments.
7. Equipped with a battery clip power cable. Users can draw power from the vehicle battery.
Diagram and Operating Principle:
Used in conjunction with PCMtuner:
Easy to Use:
1. Connect the Godiag GT107+ to the transmission ECU according to the transmission ECU wiring instructions. Suitable for VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, Renault DC0/DC4, Gen2, Honda LUK UDCT.
2. Connect the 12V 2A DC power supply. (The function buttons must be in the up position before connecting the power supply.)
3. The GODIAG GT107+ analog ignition switch is in “automatic” mode when the ignition switch is not pressed, and the adapter’s voltage and current data are displayed as 0V 0A; when the ignition switch is pressed, it is in “manual” mode, and the adapter displays the current operating voltage of the power supply and the current operating current of the transmission ECU. (Note: Please select “automatic” or “manual” analog ignition mode according to the mode required by the device for data reading and writing.)
4. Connect PCMFlash, PCMTuner, and J2534passthru.
5. Perform data reading and writing operations.
Vehicle Use: Easy to Use:
1. Connect the Godiag GT107+ to the transmission ECU according to the transmission ECU wiring diagram. Suitable for VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, Renault DC0/DC4, Gen2, and Honda LUK UDCT models.
2. Connect the 12V 2A DC power supply. (The function buttons must be in the up position before connecting the power supply.)
3. The GODIAG GT107+ analog ignition switch is in “automatic” mode when the ignition switch is not pressed, and the adapter’s voltage and current data are displayed as 0V 0A; when the ignition switch is pressed, it is in “manual” mode, and the adapter displays the current operating voltage of the power supply and the current operating current of the transmission ECU. (Note: Please select “automatic” or “manual” analog ignition mode according to the mode required by the device for data reading and writing.)
4. Connect PCMFlash, PCMTuner, and J2534passthru.
5. Perform data reading and writing operations.
Used with KESSV DQ200, DQ250, DQ500:
Easy to Use:
1. Connect the Godiag GT107+ to the transmission ECU according to the transmission ECU wiring instructions. It is compatible with VAG DQ250, DQ200, VL381, VL300, DQ500, DL501, Renault DC0/DC4 Gen2, Honda LUK UDCT, Benz, and BMW transmission ECUs.
2. Connect the 12V 2A DC power supply. (The function buttons must be in the up position before connecting the power supply.)
3. When the GODIAG GT107+ analog ignition switch is in “manual” mode, pressing the ignition switch displays the current operating voltage of the power supply and the current operating current of the transmission ECU.
4. Connect the OBD2 data reader/writer or diagnostic device.
5. Read, write data, or perform diagnostic operations on the transmission ECU.
Package Included:
1 x Godiag GT107+ ECU Programming Adapter,
1 x DB9 DSG Transmission Universal Conversion Jumper Cable
1 x DB9 DSG Transmission Universal Conversion Jumper Cable
1 x Power Cable with Battery Clip
1 Probe,
1 User Manual
1 User Manual
