Appearance: Volkswagen

Frequency: 434

Number of :Buttons: 3

Copying Type: Face to Face

Smart Remotes,It is used to duplicate the controls of the garage, shutter, barrier controls and the central locking (on-off) module that is attached to the vehicles, to change the appearance of the control or to turn it into a switch control. It is very simple and practical to use.

COPYING PROCEDURE

1.Deletion Process

Locking

Press and unlock buttons at the same time. After 2 seconds, the light will flash. After the light turns off, let go of one of the keys and press and release the key you released 3 times with 1 second intervals. (the other key will not be released until the process is finished). If the operation was successful, the light will flash continuously. So you can release the other key as well.

2. Coding Process

Our remote that we deleted with the customer remote

hold it back to back. Press the key we want to code on our remote and do not release it. Then press which key we want to code on the customer’s remote in the same way and do not release it. If the coding process is successful, the light of our remote will first flash and then start to light continuously. In this way, we perform the coding process.